Grillo G Z2 Rotavator

Grillo G Z2 Rotavator

The Grillo G Z2 rotavator is simple, reliable and safe to use, producing excellent results even in hard ground. They are compact and well-balanced, and are capable of tilling into corners and narrow areas. The G Z2 has a 57 cm tiller. Their tines are made of specially tempered steel and can easily be replaced when worn. The tines continue to rotate even when the rotavator is not moving forward allowing you to easily move the G Z2 into reverse without too much effort.

The height and side position of the handlebar can be chosen through levers without loosening screws or turning knobs.

Active coupling. When the lever is released the hoes stop immediately while the engine keeps on running. This ensures maximum handiness and greater safety.

Tilling can be performed even at a torque of 2400 r.p.m. and the user can till the soil slowly at 80-90 r.p.m. or fast up to 155 r.p.m. The G Z1 and G Z2 are fitted with 140 cc, 3 HP petrol engine with the new “Ready Start” device.

The front bumper fully protects the engine against incidental bumps and can be used as a grab bar when it is necessary to lift up the machine. Mudguards are made out of a single steel mold and are therefore very resistant. The front transfer wheel is equipped with a spring device that blocks it automatically into the working position or into the transfer position. The Grillo G Z rotavators are compact and are especially suitable for use in confined areas.

The G Z1 and G Z2 have a standard tiller comprising of 4 banks of tines with a width of 57cm, and includes side discs. Its possible to increase the width up to 80 cm or to shorten it to 35 cm (2 banks).

Gearbox in oil-bath with a single speed and assembled inside an aluminum gearbox carter to ensure maximum solidity and duration.

Warranty Information