Grillo FD450 Outfront Mower c/w 113cm (44") Deck and a 450Ltr High Lift Collection Box

FD450 Outfront Mower c/w 113cm (44″) Deck and a

450Ltr High Lift Collection Box

A professional hydrostatic mower with front-mounted cutter deck with a grass-catcher capacity of 450 Lt. The grass-catcher discharge height is 150 cm with an ejection of 57 cm; the cutting and high performance collection of this model are its best features.
The innovative cutting system “Grillo Overblow” allows tremendous acceleration of the grass/air flow into the discharge chute considerably increasing its collection capability, even in damp,wet conditions whilst at the same time keeping its noise level of the whole cutting/collecting system extremley low.
The front-mounted cutter deck gives the operator excellent visibility of his working area.

The innovative cutting system produces increased acceleration of the grass/air flow. All the blades direct the grass into a large, straight load chute at the same time significantly increasing the load capacity. In this way the grass is very well-compressed improving the overall efficiency of the 450 L. grass-catcher.

Under difficult conditions, when the grass is high and wet, the Grillo FD450 is extraordinarily efficient.
During the autumn season, when the grass is covered with leaves, the FD450 will collect them without blocking.

The blades are automatically disengaged once the grass catcher is full. There is also the possibility to choose the “buzzer indicating” option that signals when the catcher is full.

The emptying of the grass catcher is performed via electrical push-buttons, easily reached from the driver’s seat; the 2 independent hydraulic rams raise the grass catcher up to a height of 150 cm with a rear overhang of 57 cm allowing easy tipping.
Opening of the catcher rear door is automatic.

Engagement of the cutter blades is made via an electromagnetic clutch. The control is by a push-button.
The parking brake, once engaged, allows you to dismount the machine with the engine running and the blades disengaged. In this case, the hydraulic controls for the cutter deck and grass catcher are automatically excluded.

The FD450’s design is up to the minute! The bodyworks modern clean lines as well as the attention to detail will immediately impress everyone! The operators position of the machine is ergonomically designed. The comfortable and capacious seat is equipped with adjustable suspension to adapt to the operator’s weight.

Once you have finished work, cleaning the cutting deck is quick and easy! Connect a water hose to the quick coupling on the deck, let water flow and engage the blade for a few seconds…loading chute and cutter deck will be cleaned with minimal effort!

The FD450’s cutter deck can be easily demounted and be stably positioned vertically on its supports which are designed for this purpose; just remove the drive belt via a quick lever for easy maintenance or inspection. There is the option to remove the grass duct without any special tools. The engine and transmission components are easily accessible for inspection or servicing by lifting the grass-catcher and the seat.
The Grillo FD450 is equipped with lifting hooks for easy transportation.

All components, from the simplest to the most complex, are of high quality standards. Chassis, transmission, cutter deck, are all built by Grillo in Italy using only premium materials and cutting edge technology. All this to achieve a constant 100% high level quality control.

Painting of Grillo machines consists of a double electrostatic powder coated process. Grillo machines are assembled with care in every detail and tested scrupulously by specialized personnel. Final inspection means a machine whose engine has been run in order to check its performance.

Grillo FD450 has been mounted with care in every detail and tested scrupulously by specialized personnel. Final inspection means a machine whose engine has been run in order to check its performance.