Home
Products
About us
News
Other stuff
Contact us
Grillo Climber 10 AWD 27
Grillo Climber 10 AWD 27.
Grillo Climber 10 AWD 27 is a truly unique hydrostatic brush-cutter. The permanent 4WD system combined with the 27 HP powerful engine offer brilliant performances on severe slopes and low-adherence grounds.
Please call our Sales, Service or Parts teams on 01349 863854 for any enquiries.
Grillo Climber 10 AWD 27
Grillo Climber 10 AWD 27 is a truly unique hydrostatic brush-cutter. The permanent 4WD system combined with the 27 HP powerful engine (22 HP net power) offer brilliant performances on severe slopes and low-adherence grounds. Remarkably efficient on high grass and up to 2,5 cm diameter shrubs, this machine is ideal for both agricultural and professional use. Its compact dimension has been designed to boost its performance on slopes and the Kanzaki hydrostatic transmission with differential lock on the rear wheels allow the operator to work with maximum safety, reliability and unmatched stability under any working condition.
| The cutting height is adjusted via a soft and comfortable lever. The cutting deck stops in the chosen position when the lever is released. Blades are engaged via an electric switch located near to the steering wheel. The electromagnetic clutch is fitted with a blade brake. The single-blade cutting deck has a working width of 98 cm, the progressive and assisted cutting height ranges from a minimum of 3,5 cm to a maximum of 13,5 cm. This 10 cm range allows the operator to easily negotiate kerbs and obstacles and allows them to work on uneven grounds.
The whole cutting system is always kept parallel to the ground, this ensures top cutting quality even after years of service |
| The blade is made of special steel and has a low-noise profile, the double-cutting tips are retractable in case of impact and can be turned around when one side is worn out. The whole structure of the cutting deck is very robust and remarkably resistant to impacts with stones. The large diameter blade shaft and cutting transmission guarantee reliability even under the most demanding conditions and for many hours in total safety. The cutting deck has two side protection baffles that can be raised to make maintenance and cleaning easier. The twin-cylinder, four stroke petrol engine has a 22 HP net power. It is fitted with a cyclonic professional air filter especially suitable for dusty environments and very easy to access for routine cleaning. The low-emission silencer is made of stainless steel. The fuel tank has a capacity of 13 litres and is equipped with a large filler for easier refuelling and a built-in fuel indicator on the cap. |
| The permanent four-wheel drive transmission is composed of two hydrostatic axles. The rear hydrostatic axle is equipped with differential lock via pedal, which proves to be exceptionally useful on severe slopes and low-adherence grounds. Larger TRACTOR wheels are fitted to achieve more adherence and greater comfort on irregular ground. The front wheel axle steers and tilts and it is equipped with a hydraulic system that combined with the differential on the rear axle ensures permanent drive on all four wheels to prevent the wheels from skidding even in the tightest turns. Thanks to the four-wheel drive the operator can stop on slopes just by using the forward lever and can engage reverse in total safety with no wheel skidding. TRACTOR wheels ensure adherence on irregular grounds. In addition front wheels are puncture-proof. |
Transfers with Climber 10 are faster thanks to its speed of 9 km/h. In the case of very irregular conditions, the cutting deck can be raised up to 13,5 cm from the ground.
The roll-bar can be tilted in a couple of seconds to allow working underneath foliage.
The roll-bar can be either raised or lowered via two levers, no other tools are required.
Climber 10 is equipped with a seat whose suspension can be adjusted according to the operator’s weight. In addition the whole seat support is fitted with twin shock-absorbers to ensure greater comfort even after a long working day.
Controls are comfortable, the forward control lever enables the operator to choose the exact ground speed. When operating the brake pedal, the rear axle is braked and the forward lever comes back automatically to its stop position.
On the upper par of the cutting deck there is a baffle, that if positioned, inside the cutting deck, evenly distributes the grass onto the lawn.
The rotating beacon can be mounted on the roll-bar and is then connected to the 12V plug.
Each single component, from the simplest to the most complex, is of high quality. Frame, handlebar, cutting deck, are all designed and built by Grillo using exclusively premium materials and modern technology to ensure 100% controlled, high quality.
Painting of Grillo machines incorporates a double electrostatic powder coating process. At the first stage are the washing baths and preparation, then a first protective coat is applied which is then baked in a special oven, this has proven to be the best base for the application of the finish. The second coat consists of powder coating and still further baking in an oven at 190°C, this then produces the characteristic hardness and shine.
Assembling operations of Climber 10 AWD 27 are carried out meticulously by specialist staff.
It then undergoes a rigorous final test with its engine running to ensure that all of its functions work properly.
Like all Grillo products, Climber 10 AWD 27 has been designed and built to last and retain its value over many years. All Grillo machines are distributed and serviced by a widespread dealer network.
Warranty Information
2 Year Domestic Warranty (Parts and Labour)
2 Year Commercial Warranty (1st year parts and labour, 2nd year parts only)
Technical data sheet Climber 10 AWD 27
| Engine | Briggs & Stratton Series 8270 Commercial Start electric, with 12 V battery Supply fuel Displacement 724 cc, 2 Cylinders Power 22 HP (16.2 kW) (27 HP Gross Power) Air cooled Dry air filter with interchangeable filter cartridges |
| Fuel tank capacity | 13 L |
| Gearbox | 4-wheel-drive hydrostatic transmission |
| Clutch | Electromagnetic clutch with P.T.O and blade brake. |
| Cutter deck | Side and rear discharge |
| Cutting configuration | 1 rotating blade |
| Cutting width | 98cm (38″) |
| Cutting height | From 35 mm to 135 mm with continuous adjustment |
| Peripheral blade speed | 87 m/1″ |
| Differential locking | On the rear axle, with pedal engagement. |
| Front tyres | 16×6.50-8 tractor. With anti-puncture treatment as standard feature. |
| Rear tyres | 20×10.00-8 TRACTOR |
| Speed | Continuously variable from 0 to 9 km/h + reverse speed from 0 to 8 km/h. |
| Inner turning radius | 70 cm |
| Seat | With weight-adjustable suspension, equipped with roll-bar |
| Parking brake | On the rear wheels with lever engagement |
| Mowing capacity per hour (indicative) | 7500 m^2/h |
| Standard features | Tow bar and front LED headlight |
| Length | 2060 mm |
| Width | 1080 mm |
| Height | 1185 mm |
| Weight | 345 kg |
You must be logged in to post a review.